The Next Generation - News center

We’ve published some improvements and fixed some bugs over the last week:
​

What's new

Kilometer markers on German motorways. The map now shows the kilometer markers along German federal motorways (Autobahn), so you can match a position on the map with the signposted motorway kilometer, for example when coordinating with drivers or locating an incident.

Easier ferry search. When you hover over a ferry in the search results list, the matching ferry on the map now shows its details pop-up, so you can see right away where each result is located.

Bugfixes

• When you enter a stop's load weight and use the arrow key to move from tons to kilograms, the panel no longer jumps to the next stop.
• Map markers for ferries you added to your route as waypoints show their departure and arrival times again.
• Ferry pop-ups on the map are no longer hidden behind other map markers.
• In the tender results table, the toll column is now labelled "Total toll", making clear that it shows the full toll amount for the route.

Check our news page for more update information.

Corrected truck tolls for Austria

A toll section at the Karawanken Tunnel was counted twice in Austrian toll costs. From October 2, 2026, it is charged only once, so toll totals for routes through the tunnel are correct again.
​
Check all updates in our News center.

We recently published a new toll update for Romania:

This scenario contains tariffs for TollRO, the new distance-based truck toll in Romania, effective October 1st, 2026. The provision applies to all trucks in excess of 3.5 tons on motorways/express ways and national roads. Cost is calculated based on weight classification, road category, and the environmental emission class.

Check all updates in our News center.

We’ve published some improvements and fixed some bugs over the last week:
​

What's new

New map layer selection. The layer picker has a new design. With many POI layers and your own address layers, it's now easy to see everything that's available. It also remembers the tab you used last (map style, POIs or address layers).

Ferry travel time at a glance. On a route with a ferry, the ferry's travel time now shows right next to the vehicle icons in the route header.

See which vehicles a ferry takes. The ferry info popup on the map still shows all vehicle types, but the ones that can't use that ferry are now crossed out.

Country codes in route reports. Stops in the route report now include the country code, so you can quickly tell similar place names in different countries apart.

Address layers in a consistent order. Address layer tabs in the Data Manager are now sorted the same way as in the layer panel on the map.

Clear message at your address layer limit. If you've reached the most address layers your plan allows and try to create another, a message now tells you so.

Bugfixes

Pressing Enter twice in the "Add stop" field no longer adds the same stop twice.

Long vehicle names no longer spill out of the vehicle dropdown in the stop panel.

Search results now fill the full panel height, so the stop list no longer shows through behind them.

Check our news page for more update information.

We’ve published some improvements and fixed some bugs over the last few weeks:
​

What's new

You can now search for ferries more intuitively: results are sorted so ferries matching your searched port as the starting point appear first, followed by those where it's the destination.

Bug fixes

Fixed: in toll scenario settings, an accidental click on the "update all" field could reset toll costs for every country to zero — this control has been removed to prevent it.

Fixed: address layers with clustering turned off no longer show a mix of clustered and individual markers when zooming in and out.

Fixed: moving a shared route folder to private now shows the correct message instead of an incorrect "unable to update" notice.

Fixed: closing a route with no stops no longer shows an unnecessary "unsaved changes" warning.

Fixed: selecting all addresses in a filtered list and adding them to a route now adds the filtered addresses, not the first 100 unfiltered ones.

Fixed: editing a stop after rearranging a via-point no longer opens the wrong stop's panel with the wrong highlight color.

Fixed: dragging a via-point to the very start or end of a route now shows a warning message, the same way it already does for ferry stops.

Fixed: moving a via-point to a different location now updates its name to match, instead of keeping the original location's name.

Fixed: the toll scenario update message now correctly explains that surcharge values reset to default when a toll scenario update is available.

Fixed: truck routes now correctly use the specific road-access point for an address (from geocoding) instead of ignoring it, so trucks are routed to the right entrance.

Fixed: the country costs report now shows the converted price for special tolls instead of the national currency price.

Fixed: switching a route between dynamic and standard routing mode with a set toll time no longer causes route calculation to fail.​

Check our news page for more update information.

We’ve published some huge improvements and fixed some bugs the last weeks:
​

What's new and/or improved?

• You can now add via-points directly when adding a stop, giving you more control over how a vehicle reaches its destination.
• Your "Advanced mode" selection for routing preferences per road type is now remembered, so you don't have to reselect it every time.
• You can now reset speed settings for a vehicle profile back to default with a single click.
• Toll surcharge settings can now be filtered and grouped by country, making it easier to manage settings across regions.
• When you select a ferry connection in search results, the map now zooms in and draws a connecting line between start and destination so the route is easy to follow. Selecting a ferry result also brings its map marker to the front, and pedestrian-only ferries no longer appear in ferry search results.
• Reports now include a cost-per-country breakdown and a more compact stop list, with the signature removed and a smaller font size for easier reading. Report exports also handle special characters and Cyrillic text more reliably, so file names and multi-line addresses no longer come out garbled.

Bug fixes

• Moving a folder with subfolders in Saved Routes no longer shows an incorrect error message.
• The toll date field no longer disappears when switching to standard routing.
• The update date for a saved route now refreshes correctly after saving changes.
• The options button in route planning now has the correct size and shows a tooltip.
• Toggling off address layers now works reliably every time.
• Ferry search results are no longer always added to the end of the route.
• Setting a high avoid value for delivery-only penalties no longer triggers an error.
• Changing one penalty type for a vehicle no longer resets all other penalty types to zero.
• Loading a saved route with a start date in the past no longer overwrites it with today's date.
• Protected vehicles now correctly display their custom speed and penalty settings instead of default values.
• The Data Manager's address layers no longer show unrelated POI layers or unnecessary internal fields.
• Routing with a reference vehicle no longer fails due to unsupported parameters.
• The route options button in Tender+ now works when using a non-standard vehicle.

Check our news page for more update information.

We recently published a new toll update for Germany (The Next Generation):

This update contains new geometry valid from July 2026 and new tariffs for the Warnowtunnel valid from November 2025.

​Recent updates

We’ve published some huge improvements and fixed some bugs the last weeks:
​

What's new

Ferry planning got a lot smoother. Search for ferry connections directly in the search panel and add one to your route with a single click. Connections with the same name are now clearly labeled by direction (e.g. "Rostock → Trelleborg" vs. "Trelleborg → Rostock"), so it's always clear which one you're picking, and frequently used ferry connections can now be saved as favorites for quick access later.

Toll surcharges are easier to manage. Your own toll surcharge values per country can now be saved, with the option to fall back to default values. In the toll surcharge table, editable fields are now visually highlighted, making it clear at a glance which values can be adjusted.

More control over route calculation. Road types, crossings, tolls, and access restrictions can now be fine-tuned to influence how routes are calculated — pick a normal mode with simple selection buttons, or switch to an advanced mode for detailed per-road-type settings (prefer, avoid, or block), with a one-click reset back to defaults.

Saved routes are easier to organize: entire folders can now be dragged and dropped, including moving folders between private and shared sections.

Vehicle profiles now support country-specific low-emission-zone exemptions, so route calculations correctly account for any exemptions that vehicle holds.

Upcoming toll changes: When a route is affected by an upcoming toll change, applying it now triggers an immediate recalculation, so pricing is always up to date before a route is committed to.

Past dates: Dates are now selectable when planning a route also for former dates, with a warning shown as a reminder that the calculation is retroactive.

A few smaller refinements round things out: the location search field opens as a clean dropdown for faster address lookup, the stops panel offers helpful guidance when empty, and the route options button is now a compact icon showing when custom settings are active.

Bugfixes

• The loading spinner in the ferry and terminal search panel is now correctly centered.
• Searching for a location again after pressing Enter no longer incorrectly shows "no locations found."
• Rows in the vehicle selection menu were too tall, sometimes hiding the select or save buttons — sizing is now corrected.
• Importing a route where a ferry is the starting stop is now correctly recognized.
• The hint text for adding an address layer now shows the correct instructions.
• Correcting a poorly geocoded imported stop using a saved favorite now updates that stop instead of adding a duplicate.
• The "new version available" notification no longer appears twice.
• The product home page no longer fails to load when no language preference is set — it now defaults to English.

Check our news page for more update information.

We’ve published some new improvements and fixed some bugs this week:
​

What's new

Faster stop entry. The "Add stop" field now sits at the top of the Stops panel, so you can add a new stop right away without extra scrolling or clicks.

Easier to find ferry connections. The ferry search is now a direct button in the "Add stop" popover, renamed "Ferries" — no more digging through the three-dot menu. The search itself works exactly as before.

Clearer import error messages. When importing users and one of them already has an account, the error message now shows the person's name and the product they're already registered in — instead of internal ID numbers — so you can immediately see who's affected.

Bug fixes

Fixed: the app no longer crashes when it can't recognize your browser's language setting; it now falls back to a default language when displaying dates.

Check our news page for more update information.

Merwede Bridge Freight Traffic Ban - Netherlands:

Effective 18 July 2026, trucks are no longer permitted to use the Merwede Bridge (A27) due to safety restrictions. Consequently, the bridge has been blocked for truck traffic in our software as of today. To avoid the Merwede Bridge, please use the Dynamic mode with the option Historic traffic data, incl. real-time traffic.

Check our news page for more update information.